Now I know this is not a Ducati, but its parked close to a relative of a Ducati, my DB2.
I just wanted to show you my inexpensive front stand I made from 1 inch black pipe, available from most hardware stores, i.e. Home Depot. It just screws together in about 5 minutes and when you are done, you just unscrew it for storage.
The total cost was about $48. My R1 has been hanging like this for about 2 weeks while I put Race Tech Gold Valves in the forks.
|Qty||Part Description||Where Used|
|4||8" x 1" pipe||Feet|
|4||24" x 1" pipe||Vertical Legs|
|4||1" Tee||2 for Top Bar, 2 for Legs to Feet|
|2||1" 90 degree Elbows||Vertical Legs to Top Bar|
|2||4" x 1" pipe||Connect Elbow to Tee on top bar|
|4||1" Caps||End of Feet|
|2||1" Connectors||Connect two 24" pipes to make vertial legs|
|1||30" x 1" pipe||Top bar|