Single Reservoir

I combined the reservoir for the clutch and brake master cylinders into one.

I used a clutch and brake master cylinder assembly from a '98 916.

I used Buna N type tubing and a stainless steel T connector, both obtained from McMaster-Carr.

The red clips where from Home Depot.

Click for larger image

I used the stock Brake Master Cylinder reservoir as well as it's mounting bracket. I had to bend it a little to get it to fit snug. Where you can see the pile of washers, there was a small Bimota aluminum spacer. I need to make a spacer of the correct size to remove the washers